The following maintenance tasks should be performed on your washing machine:

Check for leaks: Look especially around the inlet water valves and hoses, the tub, and the water drainage system. NOTE: If you find leaks, unplug the washing machine immediately (water and electricity are a dangerous combination).

Inspect water hoses: Look for leaks around connections, and any signs of cracking of the hoses.

Clean water inlet filters: To clean the water inlet filter, close the water faucets or valves, then pull the washing machine away from the wall so that you can disconnect the hoses (have a pot handy to catch any water that runs out). The inlet water filters are a fine-mesh flat circle that fits just inside of where the hose connects to the washing machine. Remove the filters from each hose connection and clean them thoroughly. Replace, and carefully assemble and re-attach the water hoses, and put the washing machine back in position.


If your unit has a lint filter, it should be cleaned according to your manufacturer's recommendations.